Locking 7.0mm Cannulated Cancellous Screw 16mm Thread (Hex Drive) (Use with Locking Proximal Femur Plate)
- Raw Material: Stainless Steel & Titanium
Following Corresponding Instruments to be Use with above Locking Screw:
| Cat. No. | Product Description |
|---|---|
| 703.010 | Cannulated Drill Bit 4.5mm |
| 803.111 | LCP Drill Sleeve 7.0 MM For 4.5mm Drill Bit (Use with Proximal femur Plate) |
| 703.015 | Threaded Guide Wire Dia 2.0mm, Length 230mm |
| 703.016 | Large Cannulated Hexagonal Screw Driver 3.5 MM Tip – Silicon Handle |
| 703.011 | Cannulated Tap with T – Handle 7.0mm |
| 804.164 | Q.C. Torque Screw Driver Handle 3.5mm Tip (Torque 4.0Nm) |
| 804.170 | Hexagonal Screw Driver Q.C end Shaft – 3.5mm Tip (for Torque Handle 4.0Nm) |
Description
Following Size of Locking 7.0mm Cannulated Cancellous Screw 16mm Thread (Hex Drive) (Use with Locking Proximal Femur Plate) are available in Stainless Steel & Titanium Material:
| Cat. No. | Length | Cat. No. |
|---|---|---|
| Stainless Steel | Titanium | |
| 111.150 | 50 MM | Ti.111.150 |
| 111.155 | 55 MM | Ti.111.155 |
| 111.160 | 60 MM | Ti.111.160 |
| 111.165 | 65 MM | Ti.111.165 |
| 111.170 | 70 MM | Ti.111.170 |
| 111.175 | 75 MM | Ti.111.175 |
| 111.180 | 80 MM | Ti.111.180 |
| 111.185 | 85 MM | Ti.111.185 |
| 111.190 | 90 MM | Ti.111.190 |
| 111.195 | 95 MM | Ti.111.195 |
| 111.200 | 100 MM | Ti.111.200 |
| 111.205 | 105 MM | Ti.111.205 |
| 111.210 | 110 MM | Ti.111.210 |
