3.5mm Locking Head Screw – Self Tapping (HexDrive)
Following Corresponding Instruments to be Use with above Locking Screw:
Cat. No. | Product Description |
---|---|
260.281 | Drill Bit – S.S. – Quick Coupling End Dia 2.8mm X 180mm Long – Calibrated |
301.026 | Hexagonal Screw Driver With Self Holding Sleeve 2.5mm Tip (for 2.7mm Cortical, 3.5mm & 4.0mm Locking Head screws) |
301.040 | Small Hexagonal Screw Driver 2.5mm Tip – Silicon Handle |
804.110 | LCP Drill Sleeve 3.5mm for Drill Bit 2.8mm |
804.121 | Tap for 3.5 MM Locking Head Screws |
804.163 | Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm) |
804.168 | Hexagonal Screw Driver Q.C. End Shaft, 2.5mm Tip (for Torque Handle 1.5Nm) |
804.114 | Variable Angle Drill Guide for 3.5/ 4.0mm Variable Angle – LCP Plate – (Optional) |
303.010 | Small Depth Gauge |
804.105 | LCP Universal Drill Guide 3.5mm |
Cat No. (Stainless Steel) | Length | Cat No. (Titanium) |
---|---|---|
102.310 | 10 MM | Ti.102.310 |
102.312 | 12 MM | Ti.102.312 |
102.314 | 14 MM | Ti.102.314 |
102.316 | 16 MM | Ti.102.316 |
102.318 | 18 MM | Ti.102.318 |
102.320 | 20 MM | Ti.102.320 |
102.322 | 22 MM | Ti.102.322 |
102.324 | 24 MM | Ti.102.324 |
102.326 | 26 MM | Ti.102.326 |
102.328 | 28 MM | Ti.102.328 |
102.330 | 30 MM | Ti.102.330 |
102.332 | 32 MM | Ti.102.332 |
102.334 | 34 MM | Ti.102.334 |
102.335 | 35 MM | Ti.102.335 |
102.336 | 36 MM | Ti.102.336 |
102.338 | 38 MM | Ti.102.338 |
102.340 | 40 MM | Ti.102.340 |
102.345 | 45 MM | Ti.102.345 |
102.350 | 50 MM | Ti.102.350 |
102.355 | 55 MM | Ti.102.355 |
102.360 | 60 MM | Ti.102.360 |
102.365 | 65 MM | Ti.102.365 |
102.370 | 70 MM | Ti.102.370 |
102.375 | 75 MM | Ti.102.375 |
102.380 | 80 MM | Ti.102.380 |